features 6pin sip package high efficiency up to 85% unregulated output types single output 5/9/12/15v/24v approved by ul60950-1 internal smd construction no external component required operating temperature:-40 to +85 industry standard pinout dc-dc converter 10d series 1watt 1kv isolated single output sip6 specifications typical at ta=25c, nominal input vo ltage and rated output current unless otherwise specified part number output voltage output current efficiency package style vdc ma %typ 10d-xxs03nnl 3.3 303 70 1 10d-xxs05nnl 5 200 70 1 10d-xxs09nnl 9 112 75 1 10d-xxs12nnl 12 84 78 1 10d-xxs15nnl 15 67 80 1 10d-xxs24nnl 24 42 82 1 10d-xxs05n2nl 5 200 70 2 10d-xxs09n2nl 9 112 75 2 10d-xxs12n2nl 12 84 78 2 10d-xxs15n2nl 15 67 80 2 10d-xxs24n2nl 24 42 82 2 output specifications parameters conditions min typ max units voltage tolerance 100% full load 5 % short circuit protection short term 1 sec line regulation for 1.0% of vin 1.2 % load regulation 3.3v,5v (10% to 100% f.l) 15 % load regulation 9v,12v,15v,24v (10% to 100% f.l) 10 % ripple & noise bw=dc to 20mhz 100 mvp-p transient response setting time 50% load step change 350 us yuan dean scientific yuan dean scientific co.,ltd rev:1 2018/10/01 10d series temperature derating graph note: 1.xx is input voltage:03=3.3vdc,05=5vdc,09=9vdc,1 2=12vdc,15=15vdc,24=24vdc,48=48vdc. 2. over 48vdc input voltage, using the 2nd package. 3. the input voltage increases, there will be an in crease in efficiency. 4. ? marked as recognized by ul 60950-1. input specifications parameters conditions min typ max units voltage tolerance vo,io nom 10 % filter capacitor 100 75 50 25 0 output pow er(%) -40 85 100 ambient temperature( ) nature convection
general specifications parameters conditions min typ max units isolation resistance 500vdc 1000 m switching frequency full load, nominal input 100 khz operating temperature -40 +85 humidity non condensing 95 % cooling free air convection case material dap mtbf mil-hdbk-217f@25 3500000 hours weight package1 or package2 2.1 or 2.7 g dimensions package 1 19.5x6.0x10.0 mm dimensions package 2 19.5x7.1x10.0 mm recommended test circuit 10 d series single vin +vout gnd -vout cin cout 3.3v:cin 4.7uf,25v 5v :cin 4.7uf,25v 9v :cin 4.7uf,25v 12v:cin 2.2uf,25v 15v:cin 1uf,5 0v 24v:cin 1uf,50v 48v:cin 1uf,100v 3.3v :cout 22uf,16v 5v :cout 10uf,25v 9v :cout 4.7uf,25v 12v:cout 2.2uf,25v 15v:cout 1uf,50v 24v:cout 1uf,50v part number yuan dean scientific co.,ltd rev:1 2018/10/01 output current(%) output voltage(%) 120% 110% 100% 90% 80% 70% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 110% 120% 10d - 05 s 05 n 2 nl a b c d e f g a:series b:input voltage c:single(s) d:output voltage e:unregulated(n) f:packge g:rohs version tolerance envelope graph application note vin c gnd l dc +vout -vout dc external capacitor table vin 3.3vdc 5vdc 12vdc 15vdc 24vdc 48vdc vout 5vdc 12vdc 15vdc 24vdc 9vdc external capacitor external capacitor 4.7uf/25v 4.7uf/25v 2.2uf/25v 1uf/50v 1uf/50v 1uf/100v 10uf/25v 4.7uf/25v 2.2uf/25v 1uf/50v 1uf/50v 22uf/16v 3.3vdc 9vdc 4.7uf/25v _ _ _ _ c l filtering in some circuits which are sensitive to noise and r ipple, a filtering capacitor may be added to the dc/dc output end and input end to reduce the noise and ripple. however, the capacitance of the output filt er capacitor must proper. if the capacitance is too big, a startup problem might arise. for every channel of output, providing the safe and reliable operation i s ensured, the greatest capacitance of its filter capacitor refer to the ex ternal capacitor table. to get an extreme low ripple, an "lc" filtering network may b e connected to the input and output ends of the dc/dc converter, which may produ ce a more significant filtering effect. it should also be noted that the inductance and the frequency of the "lc" filtering network should be staggered with the dc/dc frequency to avoid mutual interference (see figure 1). markings and dimensions 19.50 1 2 5 6 0.500.05 12.70 1.25 2.00 0.250.05 4.0 10.00 top view bottom view printed face 2.54 6.00 19.50 1 2 5 6 0.500.05 1.25 4.0 10.00 top view bottom view printed face 2.54 7.10 unit: mm unless otherwise specified, all tolerances are 0.25 packaging b a d c size(mm) a b c d 9.5 16.5 522 5.0 pin connection pin 1 2 5 6 single +vin -vin -vout +vout 1 2
We use cookies to deliver the best possible
web experience and assist with our advertising efforts. By continuing to use
this site, you consent to the use of cookies. For more information on
cookies, please take a look at our Privacy Policy.
